wiki.bash-hackers.org/syntax/redirection.md

# Redirection

\<wrap left todo\>Fix me: To be continued\</wrap\>  
Redirection makes it possible to control where the output of a command
goes to, and where the input of a command comes from. It's a mighty tool
that, together with pipelines, makes the shell powerful. The redirection
operators are checked whenever a [simple command is about to be
executed](/syntax/grammar/parser_exec.md).

Under normal circumstances, there are 3 files open, accessible by the
file descriptors 0, 1 and 2, all connected to your terminal:

| Name     | FD  | Description                                            |
|----------|-----|--------------------------------------------------------|
| `stdin`  | 0   | standard input stream (e.g. keyboard)                  |
| `stdout` | 1   | standard output stream (e.g. monitor)                  |
| `stderr` | 2   | standard error output stream (usually also on monitor) |

\<wrap center info\>The terms "monitor" and "keyboard" refer to the same
device, the **terminal** here. Check your preferred UNIX(r)-FAQ for
details, I'm too lazy to explain what a terminal is ;-) \</wrap\>

Both, `stdout` and `stderr` are output file descriptors. Their
difference is the **convention** that a program outputs payload on
`stdout` and diagnostic- and error-messages on `stderr`. If you write a
script that outputs error messages, please make sure you follow this
convention!

Whenever you **name** such a filedescriptor, i.e. you want to redirect
this descriptor, you just use the number:

    # this executes the cat-command and redirects its error messages (stderr) to the bit bucket
    cat some_file.txt 2>/dev/null

Whenever you **reference** a descriptor, to point to its current target
file, then you use a "`&`" followed by a the descriptor number:

    # this executes the echo-command and redirects its normal output (stdout) to the standard error target
    echo "There was an error" 1>&2

The redirection operation can be **anywhere** in a simple command, so
these examples are equivalent:

    cat foo.txt bar.txt >new.txt
    cat >new.txt foo.txt bar.txt
    >new.txt cat foo.txt bar.txt

\<wrap center important\>Every redirection operator takes one or two
words as operands. If you have to use operands (e.g. filenames to
redirect to) that contain spaces you **must** quote them!\</wrap\>

## Valid redirection targets and sources

This syntax is recognized whenever a `TARGET` or a `SOURCE`
specification (like below in the details descriptions) is used.

| Syntax               | Description                                                                                                                                            |
|----------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------|
| `FILENAME`           | references a normal, ordinary filename from the filesystem (which can of course be a FIFO, too. Simply everything you can reference in the filesystem) |
| `&N`                 | references the current target/source of the filedescriptor `N` ("duplicates" the filedescriptor)                                                       |
| `&-`                 | closes the redirected filedescriptor, useful instead of `> /dev/null` constructs (`> &-`)                                                              |
| `/dev/fd/N`          | duplicates the filedescriptor `N`, if `N` is a valid integer                                                                                           |
| `/dev/stdin`         | duplicates filedescriptor 0 (`stdin`)                                                                                                                  |
| `/dev/stdout`        | duplicates filedescriptor 1 (`stdout`)                                                                                                                 |
| `/dev/stderr`        | duplicates filedescriptor 2 (`stderr`)                                                                                                                 |
| `/dev/tcp/HOST/PORT` | assuming `HOST` is a valid hostname or IP address, and `PORT` is a valid port number or service name: redirect from/to the corresponding TCP socket    |
| `/dev/udp/HOST/PORT` | assuming `HOST` is a valid hostname or IP address, and `PORT` is a valid port number or service name: redirect from/to the corresponding UDP socket    |

If a target/source specification fails to open, the whole redirection
operation fails. Avoid referencing file descriptors above 9, since you
may collide with file descriptors Bash uses internally.

## Redirecting output

    N > TARGET

This redirects the file descriptor number `N` to the target `TARGET`. If
`N` is omitted, `stdout` is assumed (FD 1). The `TARGET` is
**truncated** before writing starts.

If the option `noclobber` is set with [the set
builtin](/commands/builtin/set.md), with cause the redirection to fail,
when `TARGET` names a regular file that already exists. You can manually
override that behaviour by forcing overwrite with the redirection
operator `>|` instead of `>`.

## Appending redirected output

    N >> TARGET

This redirects the file descriptor number `N` to the target `TARGET`. If
`N` is omitted, `stdout` is assumed (FD 1). The `TARGET` is **not
truncated** before writing starts.

## Redirecting output and error output

    &> TARGET

    >& TARGET

This special syntax redirects both, `stdout` and `stderr` to the
specified target. It's **equivalent** to

    > TARGET 2>&1

Since Bash4, there's `&>>TARGET`, which is equivalent to
`>> TARGET 2>&1`.

\<wrap center important\>This syntax is deprecated and should not be
used. See the page about [obsolete and deprecated
syntax](/scripting/obsolete.md).\</wrap\>

## Appending redirected output and error output

To append the cumulative redirection of `stdout` and `stderr` to a file
you simply do

    >> FILE 2>&1

    &>> FILE

## Transporting stdout and stderr through a pipe

    COMMAND1 2>&1 | COMMAND2

    COMMAND1 |& COMMAND2

## Redirecting input

    N < SOURCE

The input descriptor `N` uses `SOURCE` as its data source. If `N` is
omitted, filedescriptor 0 (`stdin`) is assumed.

## Here documents

\<BOOKMARK:tag_heredoc\>

    <<TAG
    ...
    TAG

    <<-TAG
    ...
    TAG

A here-document is an input redirection using source data specified
directly at the command line (or in the script), no "external" source.
The redirection-operator `<<` is used together with a tag `TAG` that's
used to mark the end of input later:

    # display help

    cat <<EOF
    Sorry...
    No help available yet for $PROGRAM.
    Hehe...
    EOF

As you see, substitutions are possible. To be precise, the following
substitutions and expansions are performed in the here-document data:

- [Parameter expansion](/syntax/pe.md)
- [Command substitution](/syntax/expansion/cmdsubst.md)
- [Arithmetic expansion](/syntax/expansion/arith.md)

You can avoid that by quoting the tag:

    cat <<"EOF"
    This won't be expanded: $PATH
    EOF

Last but not least, if the redirection operator `<<` is followed by a
`-` (dash), all **leading TAB** from the document data will be ignored.
This might be useful to have optical nice code also when using
here-documents.

The tag you use **must** be the only word in the line, to be recognized
as end-of-here-document marker.

\<wrap center info\>It seems that here-documents (tested on versions
`1.14.7`, `2.05b` and `3.1.17`) are correctly terminated when there is
an EOF before the end-of-here-document tag. The reason is unknown, but
it seems to be done on purpose. Bash 4 introduced a warning message when
end-of-file is seen before the tag is reached.\</wrap\>

## Here strings

    <<< WORD

The here-strings are a variation of the here-documents. The word `WORD`
is taken for the input redirection:

    cat <<< "Hello world... $NAME is here..."

Just beware to quote the `WORD` if it contains spaces. Otherwise the
rest will be given as normal parameters.

The here-string will append a newline (`\n`) to the data.

## Multiple redirections

More redirection operations can occur in a line of course. The order is
**important**! They're evaluated from **left to right**. If you want to
redirect both, `stderr` and `stdout` to the same file (like `/dev/null`,
to hide it), this is **the wrong way**:

``` bash
# { echo OUTPUT; echo ERRORS >&2; } is to simulate something that outputs to STDOUT and STDERR
# you can test with it
{ echo OUTPUT; echo ERRORS >&2; } 2>&1 1>/dev/null
```

Why? Relatively easy:

- initially, `stdout` points to your terminal (you read it)
- same applies to `stderr`, it's connected to your terminal
- `2>&1` redirects `stderr` away from the terminal to the target for
  `stdout`: **the terminal** (again...)
- `1>/dev/null` redirects `stdout` away from your terminal to the file
  `/dev/null`

What remains? `stdout` goes to `/dev/null`, `stderr` still (or better:
"again") goes to the terminal. You have to swap the order to make it do
what you want:

``` bash
{ echo OUTPUT; echo ERRORS >&2; } 1>/dev/null 2>&1
```

## Examples

How to make a program quiet (assuming all output goes to `STDOUT` and
`STDERR`?

    command >/dev/null 2>&1

## See also

- Internal: [Illustrated Redirection
  Tutorial](/howto/redirection_tutorial.md)
- Internal: [The noclobber option](/commands/builtin/set.md#tag_noclobber)
- Internal: [The exec builtin command](/commands/builtin/exec.md)
- Internal: [Simple commands parsing and
  execution](/syntax/grammar/parser_exec.md)
- Internal: [Process substitution syntax](/syntax/expansion/proc_subst.md)
- Internal: [Obsolete and deprecated syntax](/scripting/obsolete.md)