wiki.bash-hackers.org/commands/builtin/mapfile.md

# The mapfile builtin command

## Synopsis

    mapfile [-n COUNT] [-O ORIGIN] [-s COUNT] [-t] [-u FD] [-C CALLBACK] [-c QUANTUM] [ARRAY]

    readarray [-n COUNT] [-O ORIGIN] [-s COUNT] [-t] [-u FD] [-C CALLBACK] [-c QUANTUM] [ARRAY]

## Description

This builtin is also accessible using the command name `readarray`.

`mapfile` is one of the two builtin commands primarily intended for
handling standard input (the other being `read`). `mapfile` reads lines
of standard input and assigns each to the elements of an indexed array.
If no array name is given, the default array name is `MAPFILE`. The
target array must be a "normal" integer indexed array.

`mapfile` returns success (0) unless an invalid option is given or the
given array `ARRAY` is set readonly.

| Option        | Description                                                                                                                                                   |
|---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------|
| `-c QUANTUM`  | Specifies the number of lines that have to be read between every call to the callback specified with `-C`. The default QUANTUM is 5000                        |
| `-C CALLBACK` | Specifies a callback. The string `CALLBACK` can be any shell code, the index of the array that will be assigned, and the line is appended at evaluation time. |
| `-n COUNT`    | Reads at most `COUNT` lines, then terminates. If `COUNT` is 0, then all lines are read (default).                                                             |
| `-O ORIGIN`   | Starts populating the given array `ARRAY` at the index `ORIGIN` rather than clearing it and starting at index 0.                                              |
| `-s COUNT`    | Discards the first `COUNT` lines read.                                                                                                                        |
| `-t`          | Remove any trailing newline from a line read, before it is assigned to an array element.                                                                      |
| `-u FD`       | Read from filedescriptor `FD` rather than standard input.                                                                                                     |

While `mapfile` isn't a common or portable shell feature, it's
functionality will be familiar to many programmers. Almost all
programming languages (aside from shells) with support for compound
datatypes like arrays, and which handle open file objects in the
traditional way, have some analogous shortcut for easily reading all
lines of some input as a standard feature. In Bash, `mapfile` in itself
can't do anything that couldn't already be done using read and a loop,
and if portability is even a slight concern, should never be used.
However, it does *significantly* outperform a read loop, and can make
for shorter and cleaner code - especially convenient for interactive
use.

## Examples

Here's a real-world example of interactive use borrowed from Gentoo
workflow. Xorg updates require rebuilding drivers, and the
Gentoo-suggested command is less than ideal, so let's Bashify it. The
first command produces a list of packages, one per line. We can read
those into the array named "args" using `mapfile`, stripping trailing
newlines with the '-t' option. The resulting array is then expanded into
the arguments of the "emerge" command - an interface to Gentoo's package
manager. This type of usage can make for a safe and effective
replacement for xargs(1) in certain situations. Unlike xargs, all
arguments are guaranteed to be passed to a single invocation of the
command with no wordsplitting, pathname expansion, or other monkey
business.

    # eix --only-names -IC x11-drivers | { mapfile -t args; emerge -av1 "${args[@]}" <&1; }

Note the use of command grouping to keep the emerge command inside the
pipe's subshell and within the scope of "args". Also note the unusual
redirection. This is because the -a flag makes emerge interactive,
asking the user for confirmation before continuing, and checking with
isatty(3) to abort if stdin isn't pointed at a terminal. Since stdin of
the entire command group is still coming from the pipe even though
mapfile has read all available input, we just borrow FD 1 as it just so
happens to be pointing where we want it. More on this over at greycat's
wiki: <http://mywiki.wooledge.org/BashFAQ/024>

### The callback

This is one of the more unusual features of a Bash builtin. As far as
I'm able to tell, the exact behavior is as follows: If defined, as each
line is read, the code contained within the string argument to the -C
flag is evaluated and executed *before* the assignment of each array
element. There are no restrictions to this string, which can be any
arbitrary code, however, two additional "words" are automatically
appended to the end before evaluation: the index, and corresponding line
of data to be assigned to the next array element. Since all this happens
before assignment, the callback feature cannot be used to modify the
element to be assigned, though it can read and modify any array elements
already assigned.

A very simple example might be to use it as a kind of progress bar. This
will print a dot for each line read. Note the escaped comment to hide
the appended words from printf.

    $ printf '%s\n' {1..5} | mapfile -c 1 -C 'printf . \#' )
    .....

Really, the intended usage is for the callback to just contain the name
of a function, with the extra words passed to it as arguments. If you're
going to use callbacks at all, this is probably the best way because it
allows for easy access to the arguments with no ugly "code in a string".

    $ foo() { echo "|$1|"; }; mapfile -n 11 -c 2 -C 'foo' <file
    |2|
    |4|
    etc..

For the sake of completeness, here are some more complicated examples
inspired by a question asked in \#bash - how to prepend something to
every line of some input, and then output even and odd lines to separate
files. This is far from the best possible answer, but hopefully
illustrates the callback behavior:

    $ { printf 'input%s\n' {1..10} | mapfile -c 1 -C '>&$(( (${#x[@]} % 2) + 3 )) printf -- "%.sprefix %s"' x; } 3>outfile0 4>outfile1
    $ cat outfile{0,1}
    prefix input1
    prefix input3
    prefix input5
    prefix input7
    prefix input9
    prefix input2
    prefix input4
    prefix input6
    prefix input8
    prefix input10

Since redirects are syntactically allowed anywhere in a command, we put
it before the printf to stay out of the way of additional arguments.
Rather than opening "outfile\<n\>" for appending on each call by
calculating the filename, open an FD for each first and calculate which
FD to send output to by measuring the size of x mod 2. The zero-width
format specification is used to absorb the index number argument.

Another variation might be to add each of these lines to the elements of
separate arrays. I'll leave dissecting this one as an exercise for the
reader. This is quite the hack but illustrates some interesting
properties of printf -v and mapfile -C (which you should probably never
use in real code).

    $ y=( 'odd[j]' 'even[j++]' ); printf 'input%s\n' {1..10} | { mapfile -tc 1 -C 'printf -v "${y[${#x[@]} % 2]}" -- "%.sprefix %s"' x; printf '%s\n' "${odd[@]}" '' "${even[@]}"; }
    prefix input1
    prefix input3
    prefix input5
    prefix input7
    prefix input9

    prefix input2
    prefix input4
    prefix input6
    prefix input8
    prefix input10

This example based on yet another \#bash question illustrates mapfile in
combination with read. The sample input is the heredoc to `main`. The
goal is to build a "struct" based upon records in the input file made up
of the numbers following the colon on each line. Every 3rd line is a key
followed by 2 corresponding fields. The showRecord function takes a key
and returns the record.

    #!/usr/bin/env bash

    showRecord() {
        printf 'key[%d] = %d, %d\n' "$1" "${vals[@]:keys[$1]*2:2}"
    }

    parseRecords() {
        trap 'unset -f _f' RETURN
        _f() {
            local x
            IFS=: read -r _ x
            ((keys[x]=n++))
        }
        local n

        _f
        mapfile -tc2 -C _f "$1"
        eval "$1"'=("${'"$1"'[@]##*:}")' # Return the array with some modification
    }

    main() {
        local -a keys vals
        parseRecords vals
        showRecord "$1"
    }

    main "$1" <<-"EOF"
    fabric.domain:123
    routex:1
    routey:2
    fabric.domain:321
    routex:6
    routey:4
    EOF

For example, running `scriptname 321` would output `key[321] = 6, 4`.
Every 2 lines read by `mapfile`, the function `_f` is called, which
reads one additional line. Since the first line in the file is a key,
and `_f` is responsible for the keys, it gets called first so that
`mapfile` starts by reading the second line of input, calling `_f` with
each subsequent 2 iterations. The RETURN trap is unimportant.

## Bugs

- Early implementations were buggy. For example, `mapfile` filling the
  readline history buffer with calls to the `CALLBACK`. This was fixed
  in 4.1 beta.
- `mapfile -n` reads an extra line beyond the last line assigned to the
  array, through Bash. [Fixed in
  4.2.35](ftp://ftp.gnu.org/gnu/bash/bash-4.2-patches/bash42-035).
- `mapfile` callbacks could cause a crash if the variable being assigned
  is manipulated in certain ways.
  <https://lists.gnu.org/archive/html/bug-bash/2013-01/msg00039.html>.
  Fixed in 4.3.

## To Do

- Create an implementation as a shell function that's portable between
  Ksh, Zsh, and Bash (and possibly other bourne-like shells with array
  support).

## See also

- [arrays](/syntax/arrays.md)
- [read](/commands/builtin/read.md) - If you don't know about this yet, why
  are you reading this page?
- <http://mywiki.wooledge.org/BashFAQ/001> - It's FAQ 1 for a reason.