init.lua

@@ -91,7 +91,7 @@ vim.g.mapleader = ' '
 vim.g.maplocalleader = ' '
 
 -- Set to true if you have a Nerd Font installed and selected in the terminal
-vim.g.have_nerd_font = true
+vim.g.have_nerd_font = false
 
 -- [[ Setting options ]]
 -- See `:help vim.opt`
@@ -156,11 +156,6 @@ vim.opt.cursorline = true
 -- Minimal number of screen lines to keep above and below the cursor.
 vim.opt.scrolloff = 10
 
--- if performing an operation that would fail due to unsaved changes in the buffer (like `:q`),
--- instead raise a dialog asking if you wish to save the current file(s)
--- See `:help 'confirm'`
-vim.opt.confirm = true
-
 -- [[ Basic Keymaps ]]
 --  See `:help vim.keymap.set()`
 
@@ -180,10 +175,10 @@ vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagn
 vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })
 
 -- TIP: Disable arrow keys in normal mode
-vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
-vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
-vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
-vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
+-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
+-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
+-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
+-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')
 
 -- Keybinds to make split navigation easier.
 --  Use CTRL+<hjkl> to switch between windows
@@ -563,26 +558,13 @@ require('lazy').setup({
           --  For example, in C this would take you to the header.
           map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')
 
-          -- This function resolves a difference between neovim nightly (version 0.11) and stable (version 0.10)
-          ---@param client vim.lsp.Client
-          ---@param method vim.lsp.protocol.Method
-          ---@param bufnr? integer some lsp support methods only in specific files
-          ---@return boolean
-          local function client_supports_method(client, method, bufnr)
-            if vim.fn.has 'nvim-0.11' == 1 then
-              return client:supports_method(method, bufnr)
-            else
-              return client.supports_method(method, { bufnr = bufnr })
-            end
-          end
-
           -- The following two autocommands are used to highlight references of the
           -- word under your cursor when your cursor rests there for a little while.
           --    See `:help CursorHold` for information about when this is executed
           --
           -- When you move your cursor, the highlights will be cleared (the second autocommand).
           local client = vim.lsp.get_client_by_id(event.data.client_id)
-          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_documentHighlight, event.buf) then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_documentHighlight) then
             local highlight_augroup = vim.api.nvim_create_augroup('kickstart-lsp-highlight', { clear = false })
             vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
               buffer = event.buf,
@@ -609,7 +591,7 @@ require('lazy').setup({
           -- code, if the language server you are using supports them
           --
           -- This may be unwanted, since they displace some of your code
-          if client and client_supports_method(client, vim.lsp.protocol.Methods.textDocument_inlayHint, event.buf) then
+          if client and client.supports_method(vim.lsp.protocol.Methods.textDocument_inlayHint) then
             map('<leader>th', function()
               vim.lsp.inlay_hint.enable(not vim.lsp.inlay_hint.is_enabled { bufnr = event.buf })
             end, '[T]oggle Inlay [H]ints')
@@ -617,34 +599,15 @@ require('lazy').setup({
         end,
       })
 
-      -- Diagnostic Config
-      -- See :help vim.diagnostic.Opts
-      vim.diagnostic.config {
-        severity_sort = true,
-        float = { border = 'rounded', source = 'if_many' },
-        underline = { severity = vim.diagnostic.severity.ERROR },
-        signs = vim.g.have_nerd_font and {
-          text = {
-            [vim.diagnostic.severity.ERROR] = '󰅚 ',
-            [vim.diagnostic.severity.WARN] = '󰀪 ',
-            [vim.diagnostic.severity.INFO] = '󰋽 ',
-            [vim.diagnostic.severity.HINT] = '󰌶 ',
-          },
-        } or {},
-        virtual_text = {
-          source = 'if_many',
-          spacing = 2,
-          format = function(diagnostic)
-            local diagnostic_message = {
-              [vim.diagnostic.severity.ERROR] = diagnostic.message,
-              [vim.diagnostic.severity.WARN] = diagnostic.message,
-              [vim.diagnostic.severity.INFO] = diagnostic.message,
-              [vim.diagnostic.severity.HINT] = diagnostic.message,
-            }
-            return diagnostic_message[diagnostic.severity]
-          end,
-        },
-      }
+      -- Change diagnostic symbols in the sign column (gutter)
+      -- if vim.g.have_nerd_font then
+      --   local signs = { ERROR = '', WARN = '', INFO = '', HINT = '' }
+      --   local diagnostic_signs = {}
+      --   for type, icon in pairs(signs) do
+      --     diagnostic_signs[vim.diagnostic.severity[type]] = icon
+      --   end
+      --   vim.diagnostic.config { signs = { text = diagnostic_signs } }
+      -- end
 
       -- LSP servers and clients are able to communicate to each other what features they support.
       --  By default, Neovim doesn't support everything that is in the LSP specification.
@@ -663,19 +626,9 @@ require('lazy').setup({
       --  - settings (table): Override the default settings passed when initializing the server.
       --        For example, to see the options for `lua_ls`, you could go to: https://luals.github.io/wiki/settings/
       local servers = {
-        ansiblels = {},
-        awk_ls = {},
-        bashls = {},
-        css_variables = {},
-        cssls = {},
-        cssmodules_ls = {},
-        docker_compose_language_service = {},
-        dockerls = {},
-        html = {},
-        jsonls = {},
-        markdown_oxide = {},
-        pyright = {},
-        yamlls = {},
+        -- clangd = {},
+        -- gopls = {},
+        -- pyright = {},
         -- rust_analyzer = {},
         -- ... etc. See `:help lspconfig-all` for a list of all the pre-configured LSPs
         --
@@ -722,8 +675,6 @@ require('lazy').setup({
       require('mason-tool-installer').setup { ensure_installed = ensure_installed }
 
       require('mason-lspconfig').setup {
-        ensure_installed = {}, -- explicitly set to an empty table (Kickstart populates installs via mason-tool-installer)
-        automatic_installation = false,
         handlers = {
           function(server_name)
             local server = servers[server_name] or {}
@@ -816,7 +767,6 @@ require('lazy').setup({
       --  into multiple repos for maintenance purposes.
       'hrsh7th/cmp-nvim-lsp',
       'hrsh7th/cmp-path',
-      'hrsh7th/cmp-nvim-lsp-signature-help',
     },
     config = function()
       -- See `:help cmp`
@@ -893,7 +843,6 @@ require('lazy').setup({
           { name = 'nvim_lsp' },
           { name = 'luasnip' },
           { name = 'path' },
-          { name = 'nvim_lsp_signature_help' },
         },
       }
     end,
@@ -904,12 +853,16 @@ require('lazy').setup({
     -- change the command in the config to whatever the name of that colorscheme is.
     --
     -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`.
-    'catppuccin/nvim',
-    name = 'catppuccin',
+    'folke/tokyonight.nvim',
     priority = 1000, -- Make sure to load this before all the other start plugins.
-    config = function()
+    init = function()
       -- Load the colorscheme here.
-      vim.cmd.colorscheme 'catppuccin'
+      -- Like many other themes, this one has different styles, and you could load
+      -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
+      vim.cmd.colorscheme 'tokyonight-night'
+
+      -- You can configure highlights by doing something like:
+      vim.cmd.hi 'Comment gui=none'
     end,
   },
 
@@ -971,9 +924,6 @@ require('lazy').setup({
       },
       indent = { enable = true, disable = { 'ruby' } },
     },
-    { --NERDCommenter
-      'preservim/nerdcommenter',
-    },
     -- There are additional nvim-treesitter modules that you can use to interact
     -- with nvim-treesitter. You should go explore a few and see what interests you:
     --